Tiguan 2016 ➤, Tiguan 2021 ➤, Tiguan RUS 2017 ➤, Tiguan RUS 2021 ➤
Maintenance - Edition 12.2020
– To rectify dents, slide bellows upwards, reach inside the
bellows with your hand and press out the dents.
– Check that bellows are properly engaged in axial bearing:
♦ Correct position: bellows can be turned around rotational
axis while seated in axial bearing.
♦ Otherwise pull bellows all-round out of axial bearing by one
notch.
♦ After that, the bellows should be able to be turned around
rotational axis.
4.65
Clock and date: setting
Setting time and date in Infotainment system
– Switch on ignition.
– Switch on infotainment system.
– Press Infotainment button CAR.
– Press Setup function button.
– Press Time and date function button.
– Select function button Time and set current time.
– Select function button Date set current date.
4.66
Underbody: inspecting for damage to
underbody sealant, underbody panels,
routing of lines, plugs
NOTICE
•
During inspection, also check floor pan, wheel housings
and sills.
♦ Always ensure that all lines are secured in their mountings,
that all plugs are available and that there is no visible
damage on the underbody.
♦ Faults found must always be rectified (repair measure).
This inhibits corrosion and rusting through.
4.67
Warning stickers, Tiguan eHybrid:
checking
All high-voltage components have warning stickers on them.
When performing maintenance work, ensure that these warning
stickers are not soiled or damaged and are present on all high-
voltage components.
164
4. Descriptions of work
2024 VW Tiguan Owner's Manual
