Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤, Golf 2013 ➤, Golf 2 ...
4-cyl. direct injection engine (1.8 l and 2.0 l, 4 V, EA 888 gen III, turbocharger, chain drive) - Edition
02.2021
3
Exhaust gas temperature regulation
⇒ a3.2 nd installing parts of exhaust gas temperature regula‐
tion”, page 570
3.1
Assembly overview – exhaust gas tem‐
perature regulation
Assembly overview - exhaust gas temperature regulation, front-
wheel drive
1 - Temperature sender be‐
fore particulate filter -G506-
❑ 45 Nm
2 - Temperature sender after
particulate filter -G527-
❑ 45 Nm
Assembly overview - exhaust gas temperature regulation, all-
wheel drive
3. Exhaust gas temperature regulation
569
Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤, Golf 2013 ➤, Golf 2 ...
4-cyl. direct injection engine (1.8 l and 2.0 l, 4 V, EA 888 gen III, turbocharger, chain drive) - Edition
02.2021
1 - Temperature sender be‐
fore particulate filter -G506-
❑ 45 Nm
2 - Temperature sender after
particulate filter -G527-
❑ 45 Nm
3.2
Removing and installing parts of ex‐
haust gas temperature regulation
⇒ a3.2.2 nd installing exhaust gas temperature sender, vehicles
with all-wheel drive”, page 572
3.2.1
Removing and installing exhaust gas
temperature sender, vehicles with
front-wheel drive
Special tools and workshop equipment required
♦ Tool set -T10395A- with suitable insert
Removing
•
Observe safety precautions when working on the exhaust
system ⇒ page 3 .
– Loosen centre left underbody cladding working towards ex‐
haust system, and push it downwards slightly ⇒ General
body repairs, exterior; Rep. gr. 66; Underbody cladding; As‐
sembly overview - underbody cladding.
570
Rep. gr.26 - Exhaust system
Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤, Golf 2013 ➤, Golf 2 ...
4-cyl. direct injection engine (1.8 l and 2.0 l, 4 V, EA 888 gen III, turbocharger, chain drive) - Edition
02.2021
– Detach electrical connectors -1, 2- from bracket, disconnect
them, and move aside electrical wire.
– Unscrew temperature sender before particulate filter -G506-
-arrow-.
– Unscrew temperature sender after particulate filter -G527-
-arrow-.
Installing
Install in reverse order of removal, observing the following:
•
Take care to protect exhaust gas temperature sender from
knocks and impact; if dropped, the exhaust gas temperature
sender can no longer be used.
– Place temperature sender after particulate filter -G527- in
installation position:
3. Exhaust gas temperature regulation
571
Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤, Golf 2013 ➤, Golf 2 ...
4-cyl. direct injection engine (1.8 l and 2.0 l, 4 V, EA 888 gen III, turbocharger, chain drive) - Edition
02.2021
•
Angle -α- = max. 15°.
Specified torques
♦ ⇒ page 569
♦ ⇒ General body repairs, exterior; Rep. gr. 66; Underbody
cladding; Assembly overview - underbody cladding
3.2.2
Removing and installing exhaust gas
temperature sender, vehicles with all-
wheel drive
Special tools and workshop equipment required
♦ Tool set -T10395A- with suitable insert
Removing
•
Observe safety precautions when working on the exhaust
system ⇒ page 3 .
– Loosen centre left underbody cladding working towards ex‐
haust system, and push it downwards slightly ⇒ General
body repairs, exterior; Rep. gr. 66; Underbody cladding; As‐
sembly overview - underbody cladding.
– Detach electrical connectors -1, 2- from bracket, disconnect
them, and move aside electrical wire.
572
Rep. gr.26 - Exhaust system
Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤, Golf 2013 ➤, Golf 2 ...
4-cyl. direct injection engine (1.8 l and 2.0 l, 4 V, EA 888 gen III, turbocharger, chain drive) - Edition
02.2021
– Unscrew temperature sender before particulate filter -G506-
-arrow-.
– Unscrew temperature sender after particulate filter -G527-
-arrow-.
Installing
Install in reverse order of removal, observing the following:
•
Take care to protect exhaust gas temperature sender from
knocks and impact; if dropped, the exhaust gas temperature
sender can no longer be used.
– Place temperature sender before particulate filter -G506- in
installation position:
3. Exhaust gas temperature regulation
573
Arteon 2018 ➤, Arteon 2021 ➤, Arteon Shooting Brake 2021 ➤, Golf 2013 ➤, Golf 2 ...
4-cyl. direct injection engine (1.8 l and 2.0 l, 4 V, EA 888 gen III, turbocharger, chain drive) - Edition
02.2021
•
Angle -α- = max. 15°.
– Place temperature sender after particulate filter -G527- in
installation position:
•
Angle -α- = max. 15°.
Specified torques
♦ ⇒ page 569
♦ ⇒ General body repairs, exterior; Rep. gr. 66; Underbody
cladding; Assembly overview - underbody cladding
574
Rep. gr.26 - Exhaust system
2024 VW Tiguan Owner's Manual
