Table of Contents > Descriptions of work > Clock and date: setting

VW Tiguan 2021 Service Maintenance Manual ➜ Clock and date: setting

Tiguan 2016 ➤, Tiguan 2021 ➤, Tiguan RUS 2017 ➤, Tiguan RUS 2021 ➤  
Maintenance - Edition 12.2020  
– To rectify dents, slide bellows upwards, reach inside the  
bellows with your hand and press out the dents.  
– Check that bellows are properly engaged in axial bearing:  
♦ Correct position: bellows can be turned around rotational  
axis while seated in axial bearing.  
♦ Otherwise pull bellows all-round out of axial bearing by one  
♦ After that, the bellows should be able to be turned around  
rotational axis.  
Clock and date: setting  
Setting time and date in Infotainment system  
– Switch on ignition.  
– Switch on infotainment system.  
– Press Infotainment button CAR.  
– Press Setup function button.  
– Press Time and date function button.  
– Select function button Time and set current time.  
– Select function button Date set current date.  
Underbody: inspecting for damage to  
underbody sealant, underbody panels,  
routing of lines, plugs  
During inspection, also check floor pan, wheel housings  
and sills.  
♦ Always ensure that all lines are secured in their mountings,  
that all plugs are available and that there is no visible  
damage on the underbody.  
♦ Faults found must always be rectified (repair measure).  
This inhibits corrosion and rusting through.  
Warning stickers, Tiguan eHybrid:  
All high-voltage components have warning stickers on them.  
When performing maintenance work, ensure that these warning  
stickers are not soiled or damaged and are present on all high-  
voltage components.  
4. Descriptions of work  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW Tiguan you can write to us using the link below, describing your problem in detail, we try to answer all questions.

Ask your question on the page - Support!