Download
Table of Contents > Descriptions of work > Service interval display: Reset

VW Tiguan 2021 Service Maintenance Manual ➜ Service interval display: Reset

Tiguan 2016 ➤, Tiguan 2021 ➤, Tiguan RUS 2017 ➤, Tiguan RUS 2021 ➤  
Maintenance - Edition 12.2020  
4.58  
Service interval display: Reset  
Resetting service interval display using vehicle diagnostic tester  
Resetting service interval display without vehicle diagnostic  
Additional information for service interval display ⇒ page 8  
A reset of the service interval display during  
♦ delivery inspection  
♦ each oil change (flexible/fixed)  
is carried out!  
Note  
It is also possible to reset the service interval display (SID)  
manually. However, bear in mind that, on vehicles coded to  
flexible interval, the SID needs to be coded to fixed intervals.  
This also modifies the adaptation channel for oil quality.  
4.58.1  
Service interval display: resetting using  
vehicle diagnostic tester  
– Reset service interval display ⇒ page 31 .  
– Select the respective service which is to be reset.  
4.58.2  
Service interval display: resetting with‐  
out vehicle diagnostic tester  
Resetting oil change service  
Function button on dash panel insert:  
– With ignition switched off, press and hold button -1-.  
– Switch on ignition.  
Wait until “Reset oil change service?” appears on the display.  
– Release button -1-.  
The service interval display is now in the resetting mode.  
– Briefly press button -1- once.  
After a short time the display switches back to the original dis‐  
play.  
4. Descriptions of work  
159  
   
Tiguan 2016 ➤, Tiguan 2021 ➤, Tiguan RUS 2017 ➤, Tiguan RUS 2021 ➤  
Maintenance - Edition 12.2020  
Resetting inspection  
With function button on dash panel insert  
– With ignition switched off, press and hold button -1-.  
– Switch on ignition.  
Wait until “Reset inspection?” appears on the display. on the  
display.  
– Release button -1-.  
The service interval display is now in the resetting mode.  
– Briefly press button -1- once.  
After a short time the display switches back to the original dis‐  
play.  
4.59  
Service interval display: recoding  
Note  
If the display is not as shown in the procedure: ⇒ Operating  
instructions for vehicle diagnostic tester  
Recoding from flexible to fixed intervals  
ODIS Service  
– Connect vehicle diagnostic tester ⇒ page 31 .  
– Switch on ignition.  
– Carry out identification of vehicle.  
– Enter task data, or select “Without task”.  
– Select “Control units”.  
– Select “Dash panel insert”.  
– Select “Guided Functions”.  
– Select “Change flexible/fixed intervals”.  
– Carry out adaptation according to the information of “Guided functions”.  
Changing values for maximum distance to be driven (km) until  
next oil change service (fixed) during delivery inspection  
ODIS Service  
– Connect vehicle diagnostic tester ⇒ page 31 .  
– Switch on ignition.  
– Carry out identification of vehicle.  
160  
4. Descriptions of work  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW Tiguan you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!