Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
2
Door components
⇒ “2.3 Assembly overview - door handle and door lock”,
page 183
⇒ “2.4 Removing and installing window regulator motor”,
page 183
⇒ “2.5 Removing and installing window regulator”, page 186
⇒ “2.6 Removing and installing inner door cover”, page 189
⇒ “2.7 Removing and installing striker pin”, page 191
⇒ “2.8 Removing and installing cap on door handle”, page 193
⇒ “2.9 Removing and installing door handle”, page 198
⇒ “2.10 Removing and installing door handle bracket”,
page 201
⇒ “2.11 Removing and installing door lock”, page 204
⇒ “2.12 Removing and installing window channel”, page 208
⇒ “2.13 Removing and installing outer window slot seal”,
page 211
⇒ “2.14 Removing and installing inner window slot seal”,
page 213
2.1
Assembly overview - door components
lk
Note
The illustrations show the left-hand side. The procedure for the right-hand side is basically the same.
180
Rep. gr.58 - Rear doors, door componeGntsETtheMANUALS.org
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
1 - Rear door
❑ Removing and installing
⇒ page 165
❑ Adjusting ⇒ page 167
2 - Inner window slot seal
❑ Removing and installing
⇒ page 213
3 - Stickers
❑ Qty. 1
❑ Diameter 28 mm
❑ If necessary, manufac‐
ture using commercially
available textile adhe‐
sive tape.
4 - Dampers
❑ Self-adhesive
❑ Installing:
–
Cut to size if required,
250 mm x 160 mm Po‐
sition as shown in illus‐
tration.
–
Warm using hot air
blower - V.A.G 1416-
and push on to outer
door panel with force.
5 - Stickers
❑ Qty. 1
❑ Diameter 32 mm
❑ If necessary, manufac‐
ture using commercially
available textile adhe‐
sive tape.
6 - Inner door cover
❑ Removing and installing ⇒ page 189
7 - Door seal
8 - Stickers
❑ Qty. 1
❑ Diameter 42 mm
❑ If necessary, manufacture using commercially available textile adhesive tape.
9 - Dampers
❑ Self-adhesive
❑ Installing:
–
–
Cut to size if required, 250 mm x 160 mm Position as shown in illustration.
Warm using hot air blower - V.A.G 1416- and push on to outer door panel with force.
10 - Stickers
❑ Qty. 2
❑ Diameter 28 mm
❑ If necessary, manufacture using commercially available textile adhesive tape.
11 - Outer window slot seal
❑ Removing and installing ⇒ page 211
2. Door components
181
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
12 - Window channel
❑ Removing and installing ⇒ page 208
13 - Stickers
❑ Qty. 2
❑ 15 mm x 50 mm
❑ If necessary, manufacture using commercially available textile adhesive tape.
2.2
Assembly overview - window regulator
1 - Window regulator
❑ Removing and installing
⇒ page 186
2 - Hexagon nut
❑ Qty. 1 top
❑ 6 Nm
3 - Hexagon nut
❑ Qty. 1 bottom
❑ 6 Nm
4 - Retaining hooks for cable
drum
❑ Qty. 3
❑ Mounting for window
regulator motor
❑ Specified torque of win‐
dow regulator motor
bolts: 3 Nm
182
Rep. gr.58 - Rear doors, door componeGntsETtheMANUALS.org
2024 VW Tiguan Owner's Manual
