Download
Table of Contents > Front doors, door components, central locking > Central locking

VW Tiguan Body Repairs Exterior ➜ Central locking

lk  
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤  
General body repairs, exterior - Edition 06.2017  
3
Central locking  
⇒ “3.2 Removing and installing driver door control unit J386 and  
front passenger door control unit J387 ”, page 158  
⇒ “3.3 Removing and installing tank filler flap locking motor V155  
”, page 159  
⇒ “3.4 Removing and installing ignition key battery”, page 160  
⇒ “3.5 Removing and installing cap on ignition key”, page 162  
3.1  
Overview of fitting locations - central locking  
1 - Onboard supply control unit  
- J519-  
❑ Location: Under dash  
panel on driver side.  
❑ Removing ⇒ Electrical  
system; Rep. gr. 97 ;  
Control units; Overview  
of fitting locations - con‐  
trol units .  
2 - Alarm horn - H12-  
❑ Removing ⇒ Electrical  
system; Rep. gr. 96 ;  
Anti-theft alarm system;  
Removing and installing  
alarm horn H12 .  
3 - Coupling station  
❑ Fitting location: right A-  
pillar  
❑ To separate connec‐  
tions, release bellows at  
pillar.  
4 - Front passenger door con‐  
trol unit - J387-  
❑ Removing and installing  
⇒ page 158  
5 - Front right door lock  
❑ Door lock is secured to  
inner part of door.  
❑ Electric central locking  
is integrated into door  
lock.  
❑ Removing ⇒ page 145  
6 - Coupling station  
❑ Fitting location: right B-  
pillar.  
❑ To separate connections, release bellows at pillar.  
7 - Driver door control unit - J386-  
❑ Removing and installing ⇒ page 158  
8 - Rear right door lock  
❑ Door lock is secured to inner part of door.  
❑ Electric central locking is integrated into door lock.  
❑ Removing ⇒ page 204  
156  
Rep. gr.57 - Front doors, door components, central locking  
theMANUALS.org  
 
lk  
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤  
General body repairs, exterior - Edition 06.2017  
9 - Right connector point  
❑ Location: behind C-pillar trim  
❑ Remove and install ⇒ General body repairs, interior; Rep. gr. 70 ; Trims, interior; Removing and installing  
C-pillar trim .  
10 - Release element with button  
❑ Location: Bolted to rear lid.  
❑ Removing ⇒ page 80  
11 - Rear lid lock  
❑ Location: bolted to rear lid  
❑ Removing ⇒ page 68  
12 - Left connector point  
❑ Location: behind C-pillar trim  
❑ Remove and install ⇒ General body repairs, interior; Rep. gr. 70 ; Trims, interior; Removing and installing  
C-pillar trim .  
13 - Rear left door lock  
❑ Door lock is secured to inner part of door.  
❑ Electric central locking is integrated into door lock.  
❑ Removing ⇒ page 204  
14 - Rear left door control unit - J388-  
❑ Removing and installing ⇒ page 158  
15 - Coupling station  
❑ Location: left B-pillar  
❑ To separate connections, release bellows at pillar.  
16 - Front left door lock  
❑ Door lock is secured to inner part of door.  
❑ Electric central locking is integrated into door lock.  
❑ Removing ⇒ page 145  
17 - Driver door control unit - J386-  
❑ Removing and installing ⇒ page 158  
18 - Central switch for window regulators  
❑ Location: installed in door panel  
❑ Remove and install central switch for window regulator ⇒ Electrical system; Rep. gr. 96 ; Controls;  
Overview of fitting locations - controls in front doors .  
19 - Button for central closing  
❑ Location: installed in door panel  
❑ Remove and install button for central closing ⇒ Electrical system; Rep. gr. 96 ; Controls; Overview of  
fitting locations - controls in front doors .  
20 - Coupling station  
❑ Location: left A-pillar  
❑ To separate connections, release bellows at pillar.  
21 - Bonnet contact switch - F266-  
❑ Contact switch for anti-theft alarm.  
❑ Location: on lid lock.  
❑ Removing ⇒ page 40  
3. Central locking  
157  
theMANUALS.org  
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤  
General body repairs, exterior - Edition 06.2017  
3.2  
Removing and installing driver door con‐  
trol unit - J386- and front passenger door  
control unit - J387-  
Note  
If a new door control unit is installed, the additional functions and  
the excess force limitation feature have to be coded!  
Removing  
– Separate electrical connectors -3-.  
– Release retaining hook from outside -arrow A-.  
– Push control unit -1- downwards -arrow C-, and remove it from  
door -arrow B-.  
Installing  
– Check seals -2- for damage, and renew them as necessary.  
– Place control unit -1- in mounting holes and push upwards.  
158  
Rep. gr.57 - Front doors, door components, central locking  
theMANUALS.org  
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤  
General body repairs, exterior - Edition 06.2017  
– Push retaining hook -4- into hole until it engages.  
lk  
– Attach connectors -3-.  
3.3  
Removing and installing tank filler flap locking motor - V155-  
Removing  
– Remove fuel tank flap unit ⇒ page 94 .  
– Separate electrical connector -3-.  
– Unscrew bolts -2-.  
– Remove tank flap locking motor -1- from tank flap unit.  
Installing  
Install in reverse order, noting the following:  
– Attach electrical connector -3-.  
– Place tank flap locking motor -1- on tank flap unit.  
– Screw in bolts -2-.  
– Installing tank flap unit ⇒ page 94  
3. Central locking  
159  
theMANUALS.org