Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
lk
60 – Sunroof
1
Sliding sunroof
⇒ “1.2 Assembly overview - wind deflector”, page 216
⇒ “1.3 Removing and installing sunroof panel”, page 216
⇒ “1.4 Removing and installing rear sunroof panel”, page 220
⇒ “1.5 Adjusting sunroof panel”, page 227
⇒ “1.6 Removing and installing sliding sunroof seals”, page 231
⇒ “1.7 Removing and installing wind deflector”, page 235
⇒ “1.8 Removing and installing sunroof motor V1 ”, page 236
⇒ “1.9 Removing and installing sunroof roller blind motor V260 ”,
page 239
⇒ “1.10 Removing and installing sunroof roller blind control unit
J394 ”, page 240
⇒ “1.11 Removing and installing sliding sunroof adjustment con‐
trol unit J245 ”, page 241
⇒ “1.12 Removing and installing sunroof roller blind”, page 242
⇒ “1.13 Removing and installing sliding sunroof frame”,
page 247
⇒ “1.14 Removing and installing rear part”, page 250
⇒ “1.15 Removing and installing tilt mechanism for sliding sun‐
roof”, page 255
⇒ “1.16 Removing and installing sunroof roller blind cables”, page
257
⇒ “1.17 Operating without current”, page 260
1.1
Assembly overview - sliding sunroof
214
Rep. gr.60 - Sunroof
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
1 - Rear glass panel
❑ Removing and installing
⇒ page 220
Adjusting ⇒ page 230
2 - Bolt
❑ Qty. 12
❑ 7 Nm
3 - Seal
❑ For rear glass panel.
❑ Removing and installing
⇒ page 231
4 - Wire
5 - Inner seal
❑ Positioned on assembly
frame.
6 - Rear part
❑ Removing and installing
⇒ page 250
7 - Motor for sliding roller blind
❑ Removing and installing
⇒ page 239
8 - Bolt
❑ For securing motors.
❑ Qty. 3 per motor.
❑ 8 Nm
9 - Bolt
❑ For securing assembly
frame.
❑ Qty. 22
❑ 8 Nm
10 - Sliding roof frame
❑ Removing and installing ⇒ page 247
11 - Bowden cable
❑ For sun blind
❑ Removing and installing ⇒ page 257
12 - Bracing hoop
13 - Sunroof roller blind
❑ Removing and installing ⇒ page 242
14 - Tilting mechanism
❑ For front glass panel, with Bowden cables.
❑ Removing and installing ⇒ page 255
15 - Supporting bow
16 - Spring
17 - Wind deflector
❑ Removing and installing ⇒ page 235
18 - Sliding sunroof motor
❑ Removing and installing ⇒ page 236
1. Sliding sunroof
215
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
lk
19 - Electrical connectors
20 - Trim
21 - Bolt
❑ Qty. 6
❑ 7 Nm
22 - Front glass panel
❑ Adjusting ⇒ page 229
23 - Exterior seal
❑ Removing and installing ⇒ page 232
1.2
Assembly overview - wind deflector
1 - Wind deflector
❑ Removing and installing
⇒ page 235
1.3
Removing and installing sunroof panel
Special tools and workshop equipment required
216
Rep. gr.60 - Sunroof
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
♦ Torque wrench - V.A.G 1783-
Removing
– Open glass panel -2- until trims -1- are accessible.
– Slide interior trims -1- out towards rear in -direction of arrow-.
Note
To unscrew bolts, use a magnetic tool so that bolts do not fall into mechanism of panoramic sliding roof.
1. Sliding sunroof
217
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
– Pull seal -3- from assembly frame.
– Unscrew bolts -2- from glass panel -1- on left and right.
– Remove glass panel upwards -arrows-.
Installing
Note
♦ New bolts must always be used when installing glass panel.
♦ To screw in bolts, use a magnetic tool so that bolts do not fall into panoramic sliding roof guide.
218
Rep. gr.60 - Sunroof
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
lk
– If necessary, shift tilting mechanism -3- on both sides until tilt
mechanism has lowered completely.
– Insert glass panel -1- from above -arrows a- into tilting mech‐
anism -3- and screw in bolts -2-; do not tighten.
– Adjusting front glass panel ⇒ page 227 .
– Tighten bolts -2-.
1. Sliding sunroof
219
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
– Place trim -2- onto glass panel -1- and push onto fasteners.
Note
♦ After the glass panel has been replaced, a basic setting must be performed.
♦ The roll-back function is disabled during the basic setting process.
♦ The basic setting is carried out with the ⇒ Vehicle diagnostic tester.
Specified torques
♦ Bolts for front glass panel
⇒ “1.1 Assembly overview - sliding sunroof”, page 214
1.4
Removing and installing rear sunroof
panel
Special tools and workshop equipment required
220
Rep. gr.60 - Sunroof
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
♦ Torque wrench - V.A.G 1783-
Removing
Note
To unscrew bolts, use a magnetic tool so that bolts do not fall into panoramic sliding roof guide.
– Remove front glass panel ⇒ page 216 .
– Pull seal -3- from assembly frame.
1. Sliding sunroof
221
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
– Unscrew bolts -2- from glass panel -1- on left and right.
– Unclip trim -1- in direction of -arrow a- and remove.
– Unscrew bolts -3- from retaining plate -2-.
222
Rep. gr.60 - Sunroof
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
– Lift rear glass panel -1- at front -arrows a-.
– Swing out rear glass panel -1- upwards -arrows b- under panel
flange -2-.
Installing
Note
♦ New bolts must always be used when installing glass panel.
♦ To screw in bolts, use a magnetic tool so that bolts do not fall into panoramic sliding roof guide.
1. Sliding sunroof
223
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
lk
Install in reverse order, noting the following:
– Swing in rear glass panel -1- at an angle from above under
panel flange -2-.
– Insert rear glass panel -1- in roof aperture and align.
224
Rep. gr.60 - Sunroof
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
– Insert bolts -2-; do not tighten.
– Trim -1- is not installed until all bolts have been tightened.
1. Sliding sunroof
225
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
– Insert bolts -2-; do not tighten.
– Install front glass panel ⇒ page 216 .
– Adjusting rear glass panel -1- ⇒ page 227 .
– After adjusting rear glass panel, tighten bolts.
– Press seal -3- onto assembly frame.
Note
♦ After the glass panel has been replaced, a basic setting must be performed.
♦ The roll-back function is disabled during the basic setting process.
♦ The basic setting is carried out with the ⇒ Vehicle diagnostic tester.
Specified torques
♦ Bolts for rear glass panel
⇒ “1.1 Assembly overview - sliding sunroof”, page 214
226
Rep. gr.60 - Sunroof
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
lk
1.5
Adjusting sunroof panel
⇒ “1.5.2 Adjusting front glass panel”, page 229
⇒ “1.5.3 Adjusting rear glass panel”, page 230
1.5.1
Checking height adjustment
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1783-
Note
♦ The front glass panel is adjusted at the front edge only and the rear glass panel is adjusted at the rear edge
only.
♦ To achieve the best possible optical appearance, ensure that adjustments on left and right are uniform
(symmetrical).
♦ The arrow in the illustration points in direction of normal travel.
1. Sliding sunroof
227
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
Checking height adjustment
– Check adjustment of front glass panel -1- and rear glass panel
-2- with a depth gauge.
♦ Dimension -a-: 1.5 ± 1 mm
♦ Dimension -b-: 1 ± 1 mm
♦ Dimension -c-: 1 ± 1 mm
If measured values differ from specifications, respective glass
panel must be adjusted.
♦ Adjusting front glass panel ⇒ page 229
♦ Adjusting rear glass panel ⇒ page 230
228
Rep. gr.60 - Sunroof
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
1.5.2
Adjusting front glass panel
Note
The glass panel height adjustment is performed after the glass panel has been closed from slide open position.
– Remove trim ⇒ page 216 .
– Pull seal -5- off assembly frame.
– Loosen only bolts -4- on left and right for front glass panel
-2-.
– Adjust front glass panel -2- according to dimensions
⇒ page 227 .
– Tighten bolts -4-.
– Installing trim ⇒ page 216 .
– Position seal -5- on assembly frame.
Specified torques
♦ Bolts for front glass panel
⇒ “1.1 Assembly overview - sliding sunroof”, page 214
1. Sliding sunroof
229
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 06.2017
1.5.3
Adjusting rear glass panel
– Pull inner seal -5- off assembly frame.
– Loosen bolts -4- for rear glass panel -3-.
– Adjust rear glass panel -3- according to dimensions
⇒ page 227 .
– Tighten bolts on left and right -4-.
– Position seal -5- on assembly frame.
Specified torques
♦ Bolts for rear glass panel
⇒ “1.1 Assembly overview - sliding sunroof”, page 214
230
Rep. gr.60 - Sunroof
2024 VW Tiguan Owner's Manual
