Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
Electrical system - Edition 11.2018
6
Number plate light
⇒ “6.2 Removing and installing number plate light X4 / X5 ”, page
160
⇒ “6.3 Removing and installing bulb for number plate light X4 / X5
”, page 160
6.1
Assembly overview – number plate lights
1 - Electrical connectors
2 - Number plate light -X4- / -
X5-
❑ Removing and installing
⇒ page 160
6. Number plate light
159
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
Electrical system - Edition 11.2018
6.2
Removing and installing number plate
light -X4- / -X5-
Note
♦ Removal and installation are described for the right side. Re‐
moval and installation on the left side are analogous.
♦ Since the number plate lights are equipped with LEDs, the
entire number plate light must be renewed in the event of a
fault.
Removing
– Turn light switch to zero position.
– Use a suitable tool to push right number plate light - X5- -1- in
-direction of arrow A-.
– Swing right number plate light - X5- -1- in
-direction of arrow B- out of rear lid.
– Release connector -1- and disconnect.
– Remove right number plate light - X5- -2-.
Installing
Install in the reverse order of removal, observing the following:
Note
Insert number plate light into rear lid so that retaining clip points
to right-hand side of vehicle.
– Perform functional check.
6.3
Removing and installing bulb for number
plate light - X4- / -X5-
Since the number plate lights are equipped with LEDs, the entire
number plate light must be renewed in the event of a fault.
160
Rep. gr.94 - Lights, bulbs, switches - exGteriEorTtheMANUALS.org