After starting the engine with a deeply discharged
custom comfort settings and schedules have been
misadjusted or erased. Check and correct these settings
when the battery is sufficiently charged.
or recently replaced 12-volt battery, or after using
the starting aid, some system settings, e.g. eg, the
Digital instrument panel, Pro version
Overview of the Pro version
Fig. 10 Digital instrument panel in the instrument panel (schematic representation).
1 Revolution counter (revolutions x 1000 per minute of the engine running) ÿ p. 30 2 Gear or selector
lever position currently engaged or selected ÿ p. 144 3 Display indications 4 Speedometer
5 Digital speed display
The Digital Cockpit Pro is a digital instrument
cluster with a high-resolution color TFT display. By
selecting different information profiles, additional
indications can be displayed to those of classic circular
instruments, such as the rev counter.
Hereinafter, the name "cua" will be used.
Digital Instrument Dro, Pro version” for the Digital
Cockpit Pro.
5 N M 0 1 2 7 6 0 A J
twenty-one
Digital instrument panel, Pro version
multifunction indicator can only be operated with the
buttons on the multifunction steering wheel. The functions
Control of the digital instrument
cluster, Pro version
of the buttons on the multifunction steering wheel depend
on the equipment.
Vehicles with multifunction steering wheel: As long as
there is a priority 1 warning, no menu can be accessed
ÿ p. 20. Some warnings can be confirmed and hidden using the
multifunction steering wheel button ÿ fig. eleven.
Vehicles without a multifunction steering wheel: As long
as there is a priority 1 warning, no menu can be
accessed ÿ p. 20. Some warnings can be confirmed and hidden
with the button ÿ fig. 13 1
.
Select a menu or information display
Vehicles with a multifunction steering wheel:
Fig. 11 Right side of the multifunction steering wheel:
keys for using the menus and information displays on
the instrument panel (variant 1).
1. Switch on the ignition.
2. If a message or vehicle pictogram is displayed, press the key;
if necessary, several times.
3. To display and move through a menu, press the
key or .
4. To open the displayed menu or information display, press
the key or wait a few seconds until the menuinofrormation
display opens automatically.
Vehicles without a multifunction steering
wheel: 1. Switch on the ignition.
2. If a message or a vehicle pictogram is displayed, press the
button ÿ fig. 13 1 ; if necessary, several times.
3. To display the menus or to return to the menu selection
from a menu or information display, press and hold the
Fig. 12 Right side of the multifunction steering wheel:
rocker switch ÿ fig. 13 2
keys for using the menus and the information displays
.
on the instrument panel (variant 2).
4. To switch from one menu to another, press the top or bottom
of the rocker.
5. To open the displayed menu or information display, press
the button ÿ fig. 13 1 o Wait a few seconds until the
menu or information display opens automatically.
Make settings in the menus
Vehicles with multifunction steering wheel:
1. From the displayed menu, press the or arrow key until the
desired menu option is highlighted.
Fig. 13 On the right side of the steering column: wiper
lever buttons.
The option appears framed.
On vehicles with a multifunction steering wheel, the wiper lever
does not have buttons. In this case, the
22
Driver Information
2. To make the desired modifications, press
The key
The navigation map can be displayed in three sizes. In the large
size the navigation map is displayed across the entire screen. To
adjust the size of the map, proceed as follows:
.
If the function button check box is checked , it means that
the function in question is activated.
1. To switch between map sizes, tap
The key
of the multifunction steering wheel.
Vehicles without multifunction steering wheel:
2. To enlarge or reduce the image, press the arrow key
of the multifunction steering wheel.
1. In the displayed menu, press the rocker switch at the top or
bottom ÿ fig. 13 2 until the desired menu option is
highlighted. The option appears framed.
either
3. To switch to automatic mode, while manually enlarging or
reducing the image, press the key on the multifunction
steering wheel.
2. To make the desired changes, press ÿ fig. 13 1
The key
.
Depending on equipment, navigation can be displayed on two
screens or on just one. The navigation map can be displayed
on the digital instrument panel, Pro version, and the info tainment
system, or only on the latter. In the latter case, only navigation
arrows appear on the digital instrument cluster.
A tick indicates that the system in question is activated.
Back to menu selection
Vehicles with a multifunction steering wheel:
1. Press the key
either .
Vehicles without multifunction steering
WARNING
wheel: 1. Select the menu option Back or press and hold the
If the driver is distracted while driving, accidents and serious
injuries can occur.
.
rocker button ÿ fig. 13 2
VIEW button on the multifunction steering wheel
· Never operate the instrument panel during
during the march
Vehicles with multifunction steering wheel: With the button
you can switch between the classic display of circular instruments,
the large stage display without information profiles and the
extended view with prominent information profiles. The classical
representation shows the large circular instruments on the sides
and the selected information profile in the middle.
· Only make adjustments to the instrument panel and
infotainment system when the vehicle is stationary.
Information notes, version
Pro
1. To select the preset information profiles from the list, press
and hold the key
:
Information profiles
Classic
Via the Digital Cockpit option in the vehicle settings menu of
the infotainment system, you can choose between different
information profiles on specific topics ÿ p. 41. Depending on the
information profile selected, the Digital Instrument Cluster Pro
version displays additional information in the center of the circular
instruments, or the circular instruments are hidden and the
information is displayed across the width of the screen . You can
choose between the following information profiles:
View without information profiles
Automatic The information profiles are adapted to
the selected driving profile. Only on vehicles with
available driving profile selection.
Memory entry 1
information profiles
Memory entry 2
information profiles
Memory entry 3
Individual selection of the
Individual selection of the
Only on vehicles with
— Gear indication. Digital display of currently engaged gear or
Factory fitted navigation system.
selected gear ratio.
Navigation map in the digital instrument cluster, Pro version
Vehicles with multifunction steering wheel: Depending on the
equipment, the digital instrument cluster, Pro version, can
- Speed. Digital speed indication.
- Consumption. Graphic representation of current consumption
and digital display of average consumption ÿ p. 33.
display a detailed navigation map. To do this, select the menu
option
5 N M 0 1 2 7 6 0 A J
Navigation in the digital instrument cluster.
23
Digital instrument panel, Pro version
— Autonomy. Digital indication of autonomy
remaining.
— Start-Stop system status display ÿ p. 157 — Signals
detected by the detection system of
— Detection of traffic signs. display of
detected traffic signs ÿ p. 37.
traffic signs ÿ p. 37
- Distance traveled. Digital indication of the distance traveled ÿ
p. 33.
— Depending on the equipment: display of the status of the
active cylinder management (ACT) ÿ p. 145—Economy
Driving—Engine Call Letters (MDL)
— Information about the arrival at the destination. Digital
indication of the remaining travel time, the distance to the
destination and the estimated time of arrival.
— Indications of customer assistance systems
driver
— Acceleration. Graphic representation of longitudinal and
transverse acceleration.
— Personalization: greeting and user selection ÿ p. 40 —
Fan post-run indication
— Driving assistants. Graphic representation of different driver
assistance systems ÿ p. 182.
radiator
- Altitude. Digital indication of the current height above
the sea level.
In a duly qualifi ed specialized workshop, other functions
can be programmed or existing ones can be changed
depending on the vehicle's equipment. Volkswagen recommends
a Volkswagen dealer.
— Navigation. Graphical representation of the navigation
tion by arrows.
- Compass. Digital indication of the compass.
- Audio. Digital indication of current audio playback.
Doors, front hood and tailgate open
Depending on the equipment, the number and content of the
selectable information profiles may vary.
After unlocking the vehicle and while driving, the display in the
instrument cluster shows whether any of the doors, the bonnet
or the tailgate are open and, if necessary, is also indicated by
an acoustic signal.
Possible indications on the screen
On the instrument cluster screen, version
Pro, various information can be displayed depending on the
Selector lever position The current
vehicle's equipment:
position of the selector lever is shown both next to the selector
— Doors, front hood and tailgate
open
lever and on the display in the instrument cluster.
— Warning and information messages ÿ p. twenty
If the lever is in the D/S position as well as in the Tiptronic
position, the currently engaged gear is shown on the instrument
cluster display.
— Odometer
— Time ÿ p. 35
— Indications of the multimedia and navigation system
Outside temperature indicator
If the outside temperature is less than approx. +4 °C (+39 °F),
— Telephone prompts
the outside temperature display also lights up the ice crystal
symbol This symbol remains lit until the outside temperature
.
— Outside temperature
exceeds +6 °C (+43 °F) ÿ .
— Compass display — Selector
lever position — Gear recommendation ÿ
p. 145 — Trip data display (multi-function display)
and menus for various settings
In the following situations, the indicated outside
temperature may be higher than the actual one due to
the heat emitted by the engine:
— When the vehicle is stopped.
— Service Interval Indicator ÿ p. 35
— Speed warning
— When the independent heating is in operation.
— Speed warning for road tires
winter
— When driving very slowly.
24
Driver Information
When the infotainment system is on and no route guidance is
active, a graphical representation of a compass is also displayed.
The measurement range is from -45 °C (-49 °F) to +76 °C (+169
°F).
WARNING
fuel efficient driving
Even if the outside temperature is above freezing, there
may be ice on roads and bridges.
While driving, the display of the instrument panel shows the
indication when the vehicle is driving with low consumption.
· The ice crystal symbol indicates that there may be a danger
of frost.
Engine Distinctive Letters (LDM)
At outside temperatures above +4 °C
Vehicles with digital instrument cluster: 1. Open the
(+39 °F), there may also be ice even if the ice crystal
symbol does not light up.
Service menu ÿ p. 3. 4.
2. Select the Distinctive Letters menu option from the
· Never rely solely on the outside temperature display!
engine.
Radiator fan after-run indication
phone prompts
When a mobile phone is connected via Bluetooth®, the
Bluetooth symbol is shown on the instrument panel display.
This indication appears after turning off the powertrain when
the radiator fan is post-running.
Additionally, the symbol indicates the state of charge of the
phone's battery.
Radiator fan post-run time may depend on:
— Exhaust gas treatment, e.g. For example, when regenerating
the particulate filter.
gear recommendation
While driving, a recommendation of the gear that should be
chosen to save fuel can be displayed on the instrument panel
display ÿ p. 145.
— Active brake cooling after going downhill.
— The heat dissipation of the motor after a great
effort, e.g. For example, driving with a trailer.
Odometer
Some settings can be saved to user accounts in
the personalization function.
The total odometer records the total mileage traveled by the
vehicle.
and can therefore be changed automatically when changing
The trip odometer indicates the kilometers traveled since it was
user accounts ÿ p. 40.
last reset.
There are various dashboards, hence the versions and
1. Vehicles with digital instrument panel: Reset the tripmeter
indications on the screen may vary. In the case of
to zero in the infotainment system or in the Service menu
screens without the display of informative or warning messages,
ÿ p. 3. 4.
anomalies are indicated only by control lamps.
Speed warning for winter tires
Some indications on the instrument cluster display may
If the set maximum speed is exceeded, an indication appears
be hidden by some sudden event, e.g. For example, an
incoming call.
on the instrument panel display.
ments.
Depending on the equipment, some settings and
displays can also be made or displayed in the
infotainment system.
In the infotainment system, in the vehicle settings menu,
settings for the speed warning can be made ÿ p. 365.
If there are several warnings, the corresponding symbols
will light up successively for a few seconds. The symbols
will remain on until the cause is removed.
Compass display Depending
on the equipment, when the ignition is switched on, the
direction of travel is shown in the instrument panel display with
a symbol, e.g. eg, NOT for northwest.
If warnings about existing faults are displayed when the
ignition is switched on, it may not be possible to make
settings or display information in the manner described. In this
case,
5 N M 0 1 2 7 6 0 A J
25
Digital instrument panel, Pro version