Indication Autonomy
acoustic warning, and above approx. 120 km/h (75 mph), a
permanent acoustic warning. In addition, the control indicator
illuminates on the instrument panel display. This warning is
required by law and cannot be changed.
Approximate distance in km (miles) that can still be traveled if
the same driving style is maintained.
Indication AdBlue autonomy or Autonomy
Some settings can be saved in personalization
function user accounts and can therefore be changed
automatically when switching user accounts ÿ p. 40.
Approximate distance in km (miles) that can still be traveled with
the current level of the Ad Blue® tank while maintaining the
same driving style.
The indication appears from a range of less than approx. 2400
km (1491 miles). and cannot be disabled.
Service
Indication Average speed
The average speed is displayed after traveling 100 m
tros (328 feet) approx.
Service Menu
Set a speed warning
Various settings can be made in the Service menu depending
on the equipment.
Vehicles without a multifunction steering
wheel: 1. Select Warning at --- km/h or Warning at --- mph.
Open the Service menu
1. Select the Autonomy information profile in the
2. To save the current speed and activate the lever ad
instrument panel.
warning, press the wiper
button.
2. Hold down the button on the multifunction steering wheel for
approx. 4 seconds.
3. Adjust the speed in the course of approx. 5 seconds with
3. You can now navigate the menu using the keys on the
multifunction steering wheel in the normal way.
the rocker button on the window wiper lever. Then prtehses
key
or wait a few seconds.
Reset Service Interval Indicator
The speed is saved and the warning activated.
Select the Service menu and follow the instructions on the
instrument panel display.
4. To deactivate it, press the key again
reset oil service
.
Select the Reset Oil Service menu and follow the instructions
The saved speed is deleted.
on the instrument cluster display.
ments.
Vehicles with a multifunction steering wheel:
1. Select Warning at --- km/h or Warning at --- mph.
Reset Trip Odometer
Select the Reset trip menu and follow the instructions on the
2. To save the current speed and activate the multi steering
instrument panel display.
wheel ad
warning, press the function
key.
Engine Distinctive Letters (LDM)
3. Adjust the speed in the course of approx. or the steering
wheel
Select the Engine Callsigns menu . The letters
5 seconds with the multifunction
Engine badges are displayed on the instrument cluster display.
keys. Then press the key or wait a few seconds.
set the time
The speed is saved and the warning activated.
Select the Time menu and set the correct time using the arrow
keys
and .
.
4. To deactivate it, press the key again
The saved speed is deleted.
Copyright
To consult information about the rights of
The warning can be set for speeds between 30 km/h (18
mph) and 250 km/h (155 mph).
author, select the Copyright menu.
Depending on the country, at speeds above 80 km/h
(50 mph) approx. an ad is issued once
3. 4
Driver Information
Consultation of the service date in the infotainment system:
Service Interval Indicator
1. Depending on the version, press the infotainment
Information about services appears on the instrument
cluster display and in the infotainment system.
key or function button.
and open the Vehicle menu of the system
Or: Depending on the version, press the key or the
function button
At Volkswagen, a distinction is made between oil change
services and inspections. The service interval indicator
reports the date of the next service that includes an engine
oil change and the next inspection due.
.
2. Depending on the version, open the Settings menu .
3. To view information about the services, select the Service
menu option.
There are various versions of instrument panels and
Vehicles with digital instrument cluster: The service date
infotainment systems, which is why the versions and
indications on the screens may vary.
can only be checked via the Service menu ÿ p. 3. 4.
Reset Service Interval Indicator
On vehicles with a fixed oil change service interval, the
service intervals are already predetermined.
If the service interval indicator has not been reset after
service or inspection, it can be done as follows:
For vehicles with a flexible oil change service interval, the
intervals are calculated individually. You only have to carry
Vehicles with digital instrument cluster: The service
interval indicator can only be reset via the Service menu
ÿ p. 3. 4.
out an oil change service when the vehicle needs it. This
also takes into account the conditions in which the vehicle
is used and the individual driving style. The service notice
Do not reset the indicator between service intervals;
otherwise, the indications will be incorrect.
is displayed for the first time 30 days before the date on
which the oil change service is due. Remaining kilometers
and time are always rounded to 100 km (miles) and full
days, respectively.
If the oil change service interval is manually reset, the
service interval display changes to a fixed service interval,
also on vehicles with the flexible oil change service interval.
notice of service
The service message goes off after a few
If a service or inspection is due soon, a warning will
seconds if the engine is running or by confirming
appear when the ignition is switched on.
the message on the instrument panel.
The indicated figure is the kilometers that can still be
On vehicles with a flexible service interval, if the 12-
traveled or the time remaining until the next service.
volt battery has been disconnected for a long period
of time, it will not be possible to calculate the time remaining
until the next oil change service. Hence the service interval
indicator may show incorrect calculations. In this case, the
maximum permissible maintenance intervals must be taken
into account.
Service
When it is time for an oil change service or inspection, an
audible signal will sound when the ignition is switched on
and the spanner symbol may appear for a few seconds in
the instrument cluster display, asfowlleolwl ainsgoinedicoaf tihoens:
— Inspection now!
Hour
— Oil service now!
— Oil service and inspection now!
Setting the time in the infotainment system 1.
Depending on the version, press the button or the
Check the date of services
infotainment function button.
and open the Vehicle menu of the system
With the ignition on, the engine off and the vehicle
stationary, it is possible to consult when the current
service must be carried out:
5 N M 0 1 2 7 6 0 A J
Or: Depending on the version, press the key or the
function button
.
Hour
35
2. Depending on the version, open the Settings menu .
It is bound by the laws of physics and only works
within the limits of the system. Do not let the
increased comfort provided by the fatigue
detection system induce you to take any risks that
compromise safety. When you go on long journeys,
take long enough breaks regularly.
3. To adjust the time, select the Time & Date menu
option.
Setting the time on the digital instrument cluster,
Basic version
1. Open the Service menu ÿ p. 3. 4.
2. Select the Time menu .
· The driver is always responsible for determining
his ability to drive.
.
3. Set the correct time with the key
· Never drive when you feel tired.
· The system does not always detect driver
fatigue. Please note the information in the
section Limited operation.
Sancio detection system
· In some situations, the system may mistakenly
interpret an intentional maneuver as a sign of
driver fatigue.
Introduction to the topic
· In the case of the so-called microsleep, no
no strong warning!
· Take into account the indications on the
instrument panel screen and act accordingly.
The fatigue detection system has only been
designed for driving on highways and roads in
good condition.
Fig. 24 On the instrument panel screen: fatigue
detection symbol.
In the event of a fault, have the system
checked by a qualified specialist workshop.
Volkswagen recommends a Volkswagen dealer.
The fatigue detection system informs the driver
when it deduces that he is tired from his
behavior at the wheel.
Limitations of the fatigue detection system
The fatigue detection system records the driver's
driving behavior at the start of a journey and, based
Please note on
page 36.
,at the beginning of this chapter,
on this, performs an assessment of fatigue. This is
continually compared with current driving behaviour.
If the system detects driver fatigue, it reports this
acoustically as well as visually with a symbol and a
supplementary message on the instrument panel
display ÿ fig. 24. The instrument cluster display
warning is displayed for approx. 5 seconds and, if
necessary, is displayed a second time. The system
saves the last notice that occurred.
The fatigue detection system is subject to certain
system limitations. The following conditions may
cause the system to function in a limited way or not
at all:
— speeds less than 60 km/h (37 mph) approx. —
speeds greater than 200 km/h (125 mph)
approx.
Funcionament condition
— sections with curves
Driving behavior is only assessed at speeds between
approx. 60 km/h (37 mph) and 200 km/h (125 mph).
— bad roads
— adverse weather conditions — driving
in a sporty style — driving with heavy or
long trailers ÿ p. 293 — severe driver distraction
WARNING
The intelligent technology of the fatigue detection
system cannot overcome the limits imposed
36
Driver Information
2024 VW Tiguan Owner's Manual
